The AM Forum
December 02, 2024, 02:24:20 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Restoring the silver/black Hallicrafters cabinets  (Read 18717 times)
0 Members and 2 Guests are viewing this topic.
w3jn
Johnny Novice
Administrator
Member

Offline Offline

Posts: 4612



« on: June 12, 2005, 12:45:09 PM »

These are relatively easy to "spraypaint restore".  Separate the silver lid and black bottom portion, the piano hinghe in the back is held in place with about 6 screws.  Sand down all scratches, and  finish with 800 grit wet paper, clean with a tack rag.  GIve a couple light coats of primer, sanding lightly with 800 wet paper.  Clean again witha  tack rag.

For the bottom, use matte black spray.  Several light coats are better than one thick coat.

For the top, use pewter metallic Duplicolor auto paint.  It's a *bit* brighter than the Hallicrafters stock paint, but it's the closest I've found.

Note that some Hallicrafters radios - notably the SX-100, SX-96, HT-30, SX-99,etc., do NOT use silver/black cabiniets - rather, they're a light gray semi-metallic top and a dark grey metallic bottom.
Logged

FCC:  "The record is devoid of a demonstrated nexus between Morse code proficiency and on-the-air conduct."
iw5ci
I love old radios
Member

Offline Offline

Posts: 152


WWW
« Reply #1 on: February 16, 2010, 04:27:00 AM »

I have done exactly the same on mi Halli rigs.
For the chassis i used matte black and for top cover i have found a very close match (you cannot find any difference from original).

and this is the result:

Logged

KB5MD
Contributing
Member
*
Offline Offline

Posts: 613


« Reply #2 on: February 17, 2010, 07:20:40 PM »

VERY NICE!!!!
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.052 seconds with 19 queries.