The AM Forum
April 19, 2024, 06:47:57 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: 1 [2]   Go Down
« previous next »
  Print  
Author Topic: Which balun do I use?  (Read 12487 times)
0 Members and 1 Guest are viewing this topic.
K3ZS
Member

Offline Offline

Posts: 1037
« Reply #25 on: March 18, 2009, 03:34:33 PM »
If you put the balun on the input, you better isolate the ground side of the tuner, unless you are talking about a feedline choke isolator and not a transformer balun.
Logged
Steve - WB3HUZ
Guest
« Reply #26 on: March 18, 2009, 04:10:47 PM »
That is true, no matter the balun used. The tuner will be floating, so don't touch any of the metal parts when transmitting!   Shocked
Logged
Pages: 1 [2]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: Which balun do I use?
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.068 seconds with 18 queries.