The AM Forum
April 19, 2024, 07:39:17 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: WTD: Stancor Transformer Information  (Read 3314 times)
0 Members and 1 Guest are viewing this topic.
KA8WTK
Contributing
Member
*
Offline Offline

Posts: 874
« on: December 08, 2008, 07:22:08 PM »
All,
  I have a transformer stamped on the top "Stancor". It is a 4.5" wide, 5" long and 5" tall cube. Voltages are 450-0-450 secondary with a 115 or 125 volt primary. The part number stamped on it is "52C110". This number can't be found in any of the Stancor catalogs I can find online. Anyone have a different catalog to look into?
  I am interested in the current rating.

Thanks,
            Bill
Logged
Bill KA8WTK
W3NP
Contributing
Member
*
Offline Offline

Posts: 384


WWW
« Reply #1 on: December 08, 2008, 07:54:43 PM »
Bill, Check out this thread that is down the page a bit. It concerns a Stancor xfmr with 52Cxxx part number.

http://amfone.net/Amforum/index.php?topic=17815.0
Logged
---Dave  W3NP
KA8WTK
Contributing
Member
*
Offline Offline

Posts: 874
« Reply #2 on: December 08, 2008, 08:22:29 PM »
Thanks Dave! I'll haunt the BAMA and see what it might have been used in that was Hallicrafters.

Bill
Logged
Bill KA8WTK
KA8WTK
Contributing
Member
*
Offline Offline

Posts: 874
« Reply #3 on: December 08, 2008, 08:43:30 PM »
No Joy in the BAMA. Took a look at all the Hallicrafters transmitters they list and it isn't in there.

Bill
Logged
Bill KA8WTK
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: WTD: Stancor Transformer Information
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.049 seconds with 18 queries.