The AM Forum
July 17, 2024, 04:38:06 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: RCA BTA 1R1 CONVERSION  (Read 2132 times)
0 Members and 1 Guest are viewing this topic.
WD4TC
Member

Offline Offline

Posts: 92



WWW
« on: June 12, 2008, 10:50:51 AM »

  I just got  a  BTA-1R1 and it runs just fine on the BC Freq.  Before I start bringing it up to 160 and 75 has anyone ran into any problems doing this that I should look for...Thanks...Tim...WD4TC..
Logged

Tim...WD4TC 
If it not Glowing it,It's not much for Showing
Ed-VA3ES
Member

Offline Offline

Posts: 592



« Reply #1 on: June 12, 2008, 10:55:42 AM »

Nice box! I have an R3.  To change it to 160 requires swapping out one  big mica (not sure which one).   Moving it to 80 might require same, plus modification of the main tank coil.

You may also have to do minor mods on the grid tank.
Logged

"There ain't a slaw-bukit inna worl, that kin jam me!!"
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.048 seconds with 18 queries.