The AM Forum
April 25, 2024, 04:06:39 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Expanded Boat Anchor Receiver Measurements  (Read 2963 times)
0 Members and 1 Guest are viewing this topic.
W1VD
Contributing
Member
*
Offline Offline

Posts: 401



« on: November 17, 2008, 10:34:32 AM »

Been collecting AM audio performance data in addition to the receiver dynamic range measurements. Since the amount of data is getting a bit unwieldy for a single page presentation, individual receiver measurement result web pages are now available.

Links are at http://www.w1vd.com/BAreceivertest.html about half way down the page.

Additional receiver test results will be added soon.
Logged

'Tnx Fer the Dope OM'.
w3jn
Johnny Novice
Administrator
Member

Offline Offline

Posts: 4619



« Reply #1 on: November 17, 2008, 08:53:30 PM »

Outstanding, Jay!  A few surprises there, to be sure.

One thing I noted when running distortion measurements using the HP E6380 - sometimes the LF distortion measurements were very much affected by inserting the E6380's 50 HZ LPF.   I'm willing to bet that part of the problem is AC hum on the audio.  The GPR-90, for instance, went from about 15% at 200 hz to about 3% at 30% mudulation.

Logged

FCC:  "The record is devoid of a demonstrated nexus between Morse code proficiency and on-the-air conduct."
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.077 seconds with 19 queries.