2 FET Class E Schematic

[ka1tdq]

I've been using Steve's Class E website and I'm trying to build a 2 FET Class E transmitter using an analog H modulator board.  I'm copying his schematic verbatim on the modulator board and now I'm trying to come up with the RF deck.  The attached picture is what I've come up with so far... forgive the hen scratching.

One of the questions I have is about the transformers feeding the two FETs.  Can I use FB-43-1020's as well and if so, how do I configure them?

And likewise on the 1:1 output transformers.

Any input is greatly appreciated.  Thanks.

Jon
KA1TDQ