The AM Forum

Using AMfone => Using the BBS => Topic started by: W2PFY on August 27, 2005, 07:08:44 AM



Title: QSO Button
Post by: W2PFY on August 27, 2005, 07:08:44 AM
I get no QSO button when the page loads up. What's sup wit dat??




Title: Re: QSO Button
Post by: N3WWL on August 27, 2005, 07:49:13 AM
Check for a title bar on the forum labeled The AM Bulletin Board.  Click on it to open.  The QSO section is in there.  Let me know if you found it, Terry.


Title: Re: QSO Button
Post by: W2PFY on August 28, 2005, 10:50:30 AM
Jay, I did it the way you sugested and it didn't come up. However, If I log out the QSO button apears ??? I was at IFR's yesterday and the QSO button is just fine down there. I can get into the QSO area by going to recent posts or by selecting the site from that panel on the lower right side but not from the main start up page.

Terry


Title: Re: QSO Button
Post by: N3WWL on August 28, 2005, 11:00:25 AM
Hmmmmmm......try clearing your cache.  This is the first notification we've had with this problem.  I'm working on it, Terry...hang in there  ???


Title: Re: QSO Button
Post by: W2PFY on August 28, 2005, 07:29:34 PM
Jay, I clicked the AM BB on the main page and now the QSO button is there. It may have been operator error. :P

Thanks Jay
AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands