The AM Forum

THE AM BULLETIN BOARD => QSO => Topic started by: N9NEO on June 23, 2005, 10:14:33 PM



Title: Drake R8B users?
Post by: N9NEO on June 23, 2005, 10:14:33 PM
Anybody using this radio??

Looks like I made a deal today for the radio.  Has VHF and a matching speaker.  Had to sell three boatanchors to pay for it:)


would like to hear from other users.

73
NEO


Title: Drake R8B users?
Post by: WA1GFZ on June 23, 2005, 10:17:52 PM
Bob,
Good score. I would like to see a schematic of the AM sync detector in that unit.  fc


Title: Drake R8B users?
Post by: N9NEO on June 24, 2005, 05:18:16 PM
Frank,

Ok if I get manual for radio.  Deal goes down after 4th of July.  Driving SP600 and HT32 to Philly, and Racal RA17L to Rochester.  Had to sell em all to pay for Drake, and still shy a hundred or so.

73
Bob


Title: No Schema
Post by: N9NEO on July 07, 2005, 09:54:24 PM
No Schematic with radio.  Sync detector works fb tho.  Encoder for tuning will probably have to be replaced - especially if i can't get computer to play nice with R8.  Seems the smps is a tad noisy in computer and drake is sensitive to noise.

Would like to try out some aftermarket software to control Drake.

73
Bob


Title: Drake R8B users?
Post by: KE1GF on July 10, 2005, 05:18:21 AM
looks like a very nice piece of gear Bob!


Title: Drake R8B users?
Post by: N9NEO on July 14, 2005, 09:54:24 PM
Hey Bill,

Radio is nice, but pc does interfere pretty bad.  It's not the smps, but the processor.  All quiet when fan comes up, but when micro wakes up it's noise.  Too bad cause it would have been nice to control Drake with pc.  Maybe some sheilding or emi filter still might go long way to reduce noise.

73
Bob


Title: Drake R8B users?
Post by: WA1GFZ on July 18, 2005, 08:50:24 AM
BOB,
See if it is conducted EMI or radiated. Does the noise go down if you disconnect the interface cable.  fc
AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands