The AM Forum

THE AM BULLETIN BOARD => Military Amateur Radio Section => Topic started by: KD2NFS on September 05, 2021, 06:56:06 PM



Title: Connecting ART13 to BC348
Post by: KD2NFS on September 05, 2021, 06:56:06 PM
Hi, I have my ART13 and BC348 ready to go except for the need of a cable from U-8U on ART13 to BC348. I was told that: You must connect pins 23 and 24 on the U-8U connector on the ART-13 to terminals 2 and 6 on the BC-348.

I havenít been able to locate a diagram for the pins on the U-8U.

Any assistance would be greatly appreciated.

TU es 73 de Bob KD2NFS


Title: Re: Connecting ART13 to BC348
Post by: KD2NFS on September 07, 2021, 04:35:32 PM
Just received a NOS U-8U plug and the pins are numbered. Issued resolved.
AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands