|
Title: Johnson Kilowatt Matchbox tuning knob settings Post by: W1BCC on August 08, 2020, 12:22:45 PM Ready to reassemble and test, but can't find a reference about positioning the tuning knobs.
Am I correct in guessing the indicators should point to mid scale when the capacitors are halfway meshed? I'd hate to install all 40+ screws to find I need to reopen it....... Any advice about how to proceed and test would be welcome. Thanks, --Brad W1BCC Title: Re: Johnson Kilowatt Matchbox tuning knob settings Post by: Opcom on August 08, 2020, 02:07:04 PM Can you get by with a screw every 2-3 inches or so?
Title: Re: Johnson Kilowatt Matchbox tuning knob settings Post by: w4bfs on August 21, 2020, 09:00:17 AM you have it right ... half mesh = 50 dial reading AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
|