|
Title: Washers and Nuts for Switches, Pots and Phone Jacks Post by: Carl WA1KPD on December 24, 2019, 11:21:57 AM Like most BA restorers, I replace a lot of front pannel hardware for these components as they have rusted, discolored etc
Anybody know a source for replacement items? Tnx and Happy Holidays Carl WA1KPD Title: Re: Washers and Nuts for Switches, Pots and Phone Jacks Post by: K8JLY on December 24, 2019, 12:00:58 PM Check out McMaster-Carr. They stock small pattern stainless steel washers that measure: 3/8" I.D. X 1/2-9/16" O.D. and are available in 0.030, 0.060" thickness. Have not seen source for 3/8" small pattern "jam" nuts in the finer thread sizes that fit poteniometers and jacks. Salvage what you can from junk chassis... Hope this helps.
Cid. K8JLY Title: Re: Washers and Nuts for Switches, Pots and Phone Jacks Post by: K8DI on December 24, 2019, 12:52:24 PM https://www.cedist.com/products/nut-washer-panel-38-potentiometers (https://www.cedist.com/products/nut-washer-panel-38-potentiometers)
They have many other parts. Dealers abound, ask a guitar store or repair shop in your neighborhood. Ed Title: Re: Washers and Nuts for Switches, Pots and Phone Jacks Post by: W7TFO on December 25, 2019, 03:41:38 AM "F" (cable TV) series bulkhead connectors run the same stuff as pot nuts. AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
73DG |