|
Title: SX-117 Revision Identification Post by: W1KSZ on December 07, 2018, 09:23:43 PM I know there are a few revisions to the SX-117 (A thru E or F), but how can
one tell from the Serial Number which Rev Level the receiver was built to ? Thanks, Dick, W1KSZ Title: Re: SX-117 Revision Identification Post by: WE1X on December 07, 2018, 10:38:59 PM Dick,
I had an SX-117 I worked on about a year ago. The following link should help. http://k9axn.com/_mgxroot/page_10882.html Check the mentioned resistor values in your actual receiver against those in the article. I'm not sure there is a direct correlation between serial number and revision. Harry WE1X Title: Re: SX-117 Revision Identification Post by: nq5t on December 07, 2018, 11:39:27 PM I know there are a few revisions to the SX-117 (A thru E or F), but how can one tell from the Serial Number which Rev Level the receiver was built to ? Thanks, Dick, W1KSZ The serial number stamped into the chassis has a single letter suffix which indicates the rev level. Title: Re: SX-117 Revision Identification Post by: W1KSZ on December 08, 2018, 12:07:10 AM OK, that sounds good. AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
Thanks for the info. 73, Dick, W1KSZ |