|
Title: Hallicrafters SX-25 Question Post by: w8pu on September 04, 2017, 07:09:25 PM I recently installed reproduction dials on my SX-25 and in the process of transferring the brass dial washers and collar I lost my " set screw to tuning capacitor shaft reference", long story. Can someone tell me what the main tuning dial reads when fully CCW and CW. Thanks in advance ...
Gary W8PU Title: Re: Hallicrafters SX-25 Question Post by: Carl WA1KPD on September 04, 2017, 07:41:32 PM Fully closed would be the low freq end
Title: Re: Hallicrafters SX-25 Question Post by: w8pu on September 04, 2017, 07:54:10 PM So with the main tuning cap plates fully messed the dial should read 100 on the logging scale?
73, Gary Title: Re: Hallicrafters SX-25 Question Post by: Carl WA1KPD on September 04, 2017, 08:01:31 PM Gary,
I don't remember how the logging scale goes, but for example on the BC band it should read 540 Carl Title: Re: Hallicrafters SX-25 Question Post by: WD4DMZ on September 04, 2017, 08:18:01 PM Just looked at mine... Logging scale is at 100 when the main tuning cap is fully meshed. Or 540 on the BC band as Carl noted.
Rich Title: Re: Hallicrafters SX-25 Question Post by: w8pu on September 04, 2017, 08:33:14 PM Thanks guys, I appreciate the help. AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
|