The AM Forum

THE AM BULLETIN BOARD => QSO => Topic started by: KD6VXI on May 12, 2017, 12:16:49 AM



Title: The new standard in IMD....
Post by: KD6VXI on May 12, 2017, 12:16:49 AM
Taken from amps.confesting.com

'
For the last two weeks, I've been testing the new ANAN 8000DLE.  Worst-case IMD at 200W is -75 dBc and close to -80 dBc on some bands.  The PSDR mRx result was cross-checked with an Agilent N1996A spectrum analyzer.  The combination of LDMOS, adaptive pre-distortion and a highly-isolated RF sample path back to the receiver's sampling input all contribute to this extraordinary level of transmitted IMD performance.

Paul, W9AC '



Wow......

--Shane
KD6VXI


Title: Re: The new standard in IMD....
Post by: WBear2GCR on May 12, 2017, 09:59:54 AM
Making everyone else look bad!  >:(

 ::)


Title: Re: The new standard in IMD....
Post by: KD6VXI on May 12, 2017, 10:44:57 AM
Yeah, I agree.

That was in reply to me posting about K1JJ and his 8877/4cx350 chain and it's - 55 db imd.  A couple folks had brought up that is probably the best you can hope for, using 'modern' equipment and not going to predistortion.

Will be interesting to see what a 3cx3k or 8877 pair would do wrapped into that system.  And at 200 watts, you can actually drive a 3000!

--Shane
KD6VXI
AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands