The AM Forum

THE AM BULLETIN BOARD => Technical Forum => Topic started by: xe1yzy on March 09, 2005, 01:53:09 PM



Title: PS Reactor substitution
Post by: xe1yzy on March 09, 2005, 01:53:09 PM
The reactor in the PS of my BC610E are lost, the value is 11h/55ohms/0.5amps, I have available 2 reactors the value of both are 6h/250ma/90ohms, can if I put in series both as  a substitute?

what do you think guys?
or  you have any other idea  :idea:  ?
Regards


Title: PS Reactor substitution
Post by: WA1GFZ on March 09, 2005, 02:07:11 PM
not enough current. Many guys increase the value to the plate supply filter cap to reduce hum. Without a choke your supply will be 2500/3000
volts.


Title: PS Reactor substitution
Post by: xe1yzy on March 10, 2005, 10:02:53 AM
Tnx Frank

Problem is solved, yesterday I found the choke , not exactly the same, but is a huge one, .5  amps too, hope works!

Regards!
AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands