|
Title: Rack Mount Enclosure, Front Panel & Handles Post by: W9ZSL on September 29, 2016, 04:58:19 PM Here's a rack-mount cabinet with a front panel and a pair of handles. I believe it is stainless though it has some minor corrosion. It housed a broadcast cart recorder. The enclosure measures 13 3/16" wide by 7 7/16" high (which is also the size of the front opening) by 13 1/2" deep inside dimensions. It has a pair of slide rails 2 1/2" above the bottom. A simple chassis with a pair of right angle bends front and back would be required. The front panel (made from an old aluminum sign) is 14" x 8 1/8". The aluminum handles are 5 1/4". I was going to build an exciter so there are some holes. The top screws and some of the rack screws and nuts aren't the originals. I'm asking $60 O.B.O plus shipping. More pix are available. Contact W9ZSL@yahoo.com directly. TNX/73! Mike AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
|