The AM Forum

THE AM BULLETIN BOARD => Technical Forum => Topic started by: WA4WAX on April 20, 2016, 08:55:19 PM



Title: Poptronics Cathode Modulator. Oh boy!
Post by: WA4WAX on April 20, 2016, 08:55:19 PM
Good for plate currents up to 200 mA.  Perhaps more if you sub a 6AS7 for the 6Y6!  Give that DX-60 a voice. See circuit page 112.

Have fun.

http://www.americanradiohistory.com/Archive-Poptronics/50s/59/Pop-1959-04.pdf


Title: Re: Poptronics Cathode Modulator. Oh boy!
Post by: Carl WA1KPD on April 20, 2016, 09:40:48 PM
Could not find it  in that issue


Title: Re: Poptronics Cathode Modulator. Oh boy!
Post by: WA4WAX on April 20, 2016, 10:08:25 PM
Dear Carl:

Go to "Among the Novice Hams" on page 111.  Just below this page you will see a picture of the modulator and the circuit.  The pertinent text is on a later page.

Matt  :-)


Title: Re: Poptronics Cathode Modulator. Oh boy!
Post by: w4bfs on April 20, 2016, 10:21:04 PM
good basic transformer info on pg 73
AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands