Title: ANC-4 Noise Canceller - I need a resistor value... Post by: W4LTM on January 30, 2005, 04:50:08 PM Hi gang, AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
(I posted this on another forum, but since I have found so much help here I thought I would post it on this forum as well. - Thanks) My manual does not have a diagram with values, so I was hoping yall could help. I need the value for resistor R23. It is just behind the relay. I have to replace the charred (can't read it) one that is in there now. Thanks in advance. 73, Matt W4LTM |