The AM Forum

THE AM BULLETIN BOARD => Technical Forum => Topic started by: W7SOE on April 05, 2014, 01:44:38 PM



Title: "New" Valiant
Post by: W7SOE on April 05, 2014, 01:44:38 PM
Just received my first Valiant.  It is fairly rough, with some mods.  But there are clues...  Besides undoing the mods there is a lot of cleanup and and the usual cap replacement to do etc.  
Lot's of info on this site.

Perhaps some of these pictures will mean something to you all.  Anyone have a copy of the August 1960 QST?

73

Rich


Title: Re: "New" Valiant
Post by: W7SOE on April 05, 2014, 01:45:23 PM
More pics


Title: Re: "New" Valiant
Post by: K1JJ on April 05, 2014, 03:54:43 PM
Yes, reconnecting the phone patch wire for AM patches would be my first priority....  ;)


Should be a nice rig when you get it finished up.

T


Title: Re: "New" Valiant
Post by: W7SOE on April 05, 2014, 05:07:05 PM
More weirdness, this on the left rear of the inner chassis.  Perhaps an added pot?  Uggggly.

Rich


Title: Re: "New" Valiant
Post by: Jim, W5JO on April 05, 2014, 06:50:12 PM
More weirdness, this on the left rear of the inner chassis.  Perhaps an added pot?  Uggggly.

Rich


Bias pots


Title: Re: "New" Valiant
Post by: w1vtp on April 05, 2014, 08:41:16 PM
If you are a current member of ARRL, you can get your article of interest here:

http://www.arrl.org/arrl-periodicals-archive-search

Al


Title: Re: "New" Valiant
Post by: ka4koe on April 05, 2014, 09:00:23 PM
Dante, "The Inferno"…

"Through me you go to the grief wracked city; Through me you go to everlasting pain; Through me you go a pass among lost souls. Justice inspired my exalted Creator: I am a creature of the Holiest Power, of Wisdom in the Highest and of Primal Love. Nothing till I was made was made, only eternal beings. And I endure eternally. Abandon all hope — Ye Who Enter Here."


Title: Re: "New" Valiant
Post by: W7SOE on April 06, 2014, 10:58:23 AM
Abandon all hope — Ye Who Enter Here."[/i]

Ha!  I think you nailed it.

Thanks for the insight on the bias pots.   

I am not an ARRL member so will have to proceed without the article.

Rich



Title: Re: "New" Valiant
Post by: Jim, W5JO on April 06, 2014, 11:20:56 AM
I am not an ARRL member so will have to proceed without the article.
Rich

At least you have documentation to follow which is a far cry from many modified rigs floating around.  I bet someone will be able to tell you the contents of that article.


Title: Re: "New" Valiant
Post by: W3RSW on April 06, 2014, 02:03:20 PM
Joining the ARRL will get you all the issues to way back when. Probably for Less than the cost of your yearly stamps.

Might help save some freqs. and other odds and ends too.


Title: Re: "New" Valiant
Post by: VE3AJM on April 06, 2014, 02:42:20 PM
I have the article here and can scan and send you the information.

Hints and Kinks on using the Heath SB-10 SSB adapter with the Valiant.

Al VE3AJM
AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands