|
Title: Will a 4-125A fit in a SK510 air-system socket? Post by: KI4YAN on November 17, 2013, 11:48:26 PM Just grabbed an SK510 air-system socket off E-bay...didn't notice till it was too late that the 4-125A uses the SK410 socket.
Will the 4-125A/4-400A fit the same socket as the 4-1000 and 3-1000 tubes? Title: Re: Will a 4-125A fit in a SK510 air-system socket? Post by: K1JJ on November 18, 2013, 12:07:07 AM Will the 4-125A/4-400A fit the same socket as the 4-1000 and 3-1000 tubes? No, they are different sockets. The 4X1 socket is slightly larger and the 4X1 pins are fatter. Why not look for a 4X1 tube and step it up a notch? You may be happy you got the wrong socket.... ;D T Title: Re: Will a 4-125A fit in a SK510 air-system socket? Post by: KI4YAN on November 19, 2013, 12:00:00 AM Well, if I don't nail down what I plan to do, it'll never get done. So, a single 4-125A modded by 4-65a's, with room in the RF deck for a second 4-125A OR replacing the 4-125A with a 4-250 or 4-400 at a later date, is the route I'll take. AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
|