Title: Gates BC-1T 833x4 filament transformer needed Post by: wd8das on August 07, 2013, 11:37:31 AM Gates BC-1T 833x4 filament transformer needed - mine failed with shorted turns in the primaries. This transformer has a 230 VAC primary (actually two 115 VAC windings in series) and three secondaries, all center-tapped. Two secondaries 10v at 10 amps and one 10v at 20 amps. I suspect that a variety of transformers from rigs with four 833s would work - anyone have a spare? Thanks... Steve WD8DAS sbjohnston@aol.com |