Title: Need Parts for George's 300 Watt PA: Plate Tune Cap, Collins Knobs, S866A Post by: W9ZSL on July 08, 2012, 12:15:29 AM George still needs some parts. I'm changing my mind AGAIN! Need a single- gang bread slicer 200 to 240/50 pf at 4.5 KV. Next. The project is a 300 watt all-purpose amp 4-400/250A reduced power version (4-125A) as found in the '62 West-Coast Handbook. I want it to look like a classic Collins rack rig circa 1952. Does anyone have 2 or 3 x 3" skirted knobs? Pointer or not...doesn't matter. These aren't super important because I have a slew of smaller ones. Finally I need 1 or 2 x 866A solid-state diodes. They are National SSR-13/S866A or equal. W9ZSL@yahoo.com for a QSO. By the way for you George Fans, here's what I've ended up with for the power supplies. Heavy sigh! TNX, 73! :) AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
Mike (Da Mad Mixer)(I also have a recording studio) |