The AM Forum

THE AM BULLETIN BOARD => Technical Forum => Topic started by: aa5wg on July 03, 2012, 06:09:47 PM

Title: CNC Shop
Post by: aa5wg on July 03, 2012, 06:09:47 PM

Anyone know of a ham that owns or works with a CNC plastics/machine shop
or abrasive waterjet shop?

I have some G10/FR4 green fiberglass that needs some CNC cutting.

Thanks to all.

Chuck

Title: Re: CNC Shop
Post by: N9EFJ on July 05, 2012, 06:58:08 AM

I have a small [ no more than 9X12 inches] CNC setup.

If you have the PLT code from CorelDraw I may be able to help.

Carl

Title: Re: CNC Shop
Post by: aa5wg on July 05, 2012, 08:23:06 AM

Carl:

This part is longer than 12 inches.

Thank you.

Chuck

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands