Title: TOO TUBIE Post by: KD0HUX on July 04, 2011, 08:39:29 PM HELLO AM CREW QUESTION I HAVE A RANGER (FULL & EXPANDED TIM TRON MODS). THE OUT BOARD AUDIO IS A (APHEX 230) TUBE VOICE PROCESSOR( 12AT7 TUBE) WOULD THE AUDIO SOUND TUBIE IF I USE A TUBE MIC {MAJAVE MA-200}
Title: Re: TOO TUBIE Post by: KX5JT on July 04, 2011, 10:45:02 PM Uhm. Sound "tube"? Well your speech amp (which you might be bypassing), modulator and finals are all tube.
I think this would be much better asked on the air while using the equipment. 8) Title: Re: TOO TUBIE Post by: Pete, WA2CWA on July 04, 2011, 11:12:52 PM Sounds like too many layers of icing on a one-layer cake. :D Put the $$ in the antenna or the receiver.
Title: Re: TOO TUBIE Post by: flintstone mop on July 05, 2011, 10:50:09 AM You are considering a purchase ???? Buy It !!! and connect to a REAL linear and away you go with HUGE audio. The line-up should be great.
Title: Re: TOO TUBIE Post by: w3jn on July 05, 2011, 10:52:09 AM Nobody's gonna hear the subtle difference on any HF band, given the noise, QRM, and substandard distortion performance of the AM detectors in most ham receivers.
Title: Re: TOO TUBIE Post by: KM1H on July 05, 2011, 02:46:43 PM Listen to JN and save your time and money.
Title: Re: TOO TUBIE Post by: flintstone mop on July 06, 2011, 10:39:02 AM Listen to JN and save your time and money. I agree...I jumped the gun in my reply. I thought you were purchasing a modded Ranger with the accessories. You wanna add a Tube Mic...........doh doh doh |