Title: Mosley TA-33 WARC Dipole Post by: AB3FL on July 22, 2010, 10:32:37 AM I will ask here, since the REAL experts are on this board.
How does the WARC dipole connect on a TA-33? Is it wired across the existing driver or does it use a sleeve feed? thanks Tom - AB3FL Title: Re: Mosley TA-33 WARC Dipole Post by: WBear2GCR on July 26, 2010, 10:59:20 AM I am unaware of this product, got a link? _-_-bear Title: Re: Mosley TA-33 WARC Dipole Post by: AB3FL on July 26, 2010, 11:37:34 AM http://www.mosley-electronics.com/spec%20files/amateur/srwarckit.htm
Title: Re: Mosley TA-33 WARC Dipole Post by: WBear2GCR on July 26, 2010, 12:28:17 PM call technical support?
too bad they don't have downloadable manuals... _-_-bear Title: Re: Mosley TA-33 WARC Dipole Post by: AB3FL on July 26, 2010, 01:00:45 PM I did actually call Mosley. They said it connects to the main driver with phasing lines. I would like to builld my own dipole add on for at least 17m and maybe also 12m. I am trying to avoid paying the $350 for the add on from Mosley
Tom - AB3FL Title: Re: Mosley TA-33 WARC Dipole Post by: WBear2GCR on July 26, 2010, 01:07:48 PM Ah! Well Mosely's matching system is "trick" - assuming they use the same matching system, you'd need to copy their dimensions exactly... other than that, i dunno! :D Maybe someone else reading has some insights... _-_-bear Title: Re: Mosley TA-33 WARC Dipole Post by: Pete, WA2CWA on July 26, 2010, 02:18:53 PM Have you tried something as simple as Google: "adding WARC bands to tri-bander" or "adding WARC bands to mosley tri-bander"
Title: Re: Mosley TA-33 WARC Dipole Post by: AB3FL on July 26, 2010, 02:46:48 PM Have you tried something as simple as Google: "adding WARC bands to tri-bander" or "adding WARC bands to mosley tri-bander" Of course! and found nothing. I am trying to use the same feedline for both. Anyone can put up a WARC dipole with a separate feedline. Tom - AB3FL Title: Re: Mosley TA-33 WARC Dipole Post by: Pete, WA2CWA on July 26, 2010, 03:22:06 PM You might tackle it from the point of view as to how to feed multiple dipoles from a single feedline rather then specifically how to interface your "TA-33" with a WARC dipole add-on.
Title: Re: Mosley TA-33 WARC Dipole Post by: ka3zlr on July 26, 2010, 03:50:19 PM You see them Prices :o AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
Pull that Junk down an put up an all-band dipole fed with Balanced ladder line an solve all the issues. :D Put your money an your work into a good Balanced Antenna Coupler. 73 Jack. |