The AM Forum

THE AM BULLETIN BOARD => QSO => Topic started by: AC4R on April 13, 2010, 05:20:40 PM



Title: Ten Tec Omni 7 on AM
Post by: AC4R on April 13, 2010, 05:20:40 PM
Anyone running an Omni 7 on AM ?  Looking at new rigs, and wondered how the Omni 7 would fare on AM.

 


Title: Re: Ten Tec Omni 7 on AM
Post by: Ed WA4NJY on April 14, 2010, 08:05:46 PM

    I ran an OMNI VII for over a year on AM with very good reports.  It is a nice
  radio all the way around.  When I fully retire and have more time for radio, the
  O7 will be my first radio purchase.

    Before that, I had a Jupiter which did well on AM.  There were some RF prob-
lems that were some my fault and some the rig(mic input by-passing).

     Also, get the 708 desk mic for the O7.

                                         hope this helps, Ed  WA4NJY


Title: Re: Ten Tec Omni 7 on AM
Post by: AC4R on April 17, 2010, 10:53:57 PM
Thanks for the help ED. The Omni 7 sounds like the way to go for me. Am looking at pairing it up with a Alpha 8410 running a 300 watt carrier.


73
AC4R


Title: Re: Ten Tec Omni 7 on AM
Post by: Ed WA4NJY on April 18, 2010, 07:47:55 PM

   Sounds like a great combination.

                              Ed


Title: Re: Ten Tec Omni 7 on AM
Post by: K5UJ on April 18, 2010, 11:01:55 PM
I don't know about Alphas vy much but if I were going to spend $5k on a store bought amp I'd spend another $2000 and get this:

http://www.rfconcepts.com/PRODUCTS/Promotional-Items_3/Preowned-Alpha-77SX-sn-3187

for AM.

73

Rob
AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands