The AM Forum

Hello All,

 Just after divesting myself of nearly every radio I had, I find myself 'pulled back in'. I have a fellow engineer that works in our Germany office, who showed us a very good time when we were over there. He is also a collector of radios, and even toured us around the amazing historical communications collection at the 'communications technology institute' he had attended (forgot the name).

 He is 'retiring' of sorts; he will be going back to school for his PHD and working part time in the company labs. For his 'retirement', a couple of us here would like to give him a nice old radio. One of us found a good Hallicrafters S-19R Sky Buddy.

 I am asking for any photos you might have of the Sky Buddy, inside and out, closeup, to help get my bearings. Post to the board, it might help others in the future - but make 'em as high res. as possible. I could really use a shot of the pointer and the speaker

Thanks all.

David Goncalves
W1EUJ

David,

I brought one of these back from the dead for a "buddy" at work. He let me use it in the AWA pre-1945 CW contest. What a fun radio. I restored the original BFO (somebody had JS'd a 6SN7) in and replaced the rectifier from a 5Y3 back to a type 80.

I made a little Q-multiplier for it with a 6J5 that plugs into the rear socket.

Mike WU2D

Mike,

 Thanks for the reply, but that's a photo of a transmitter, with a Sky Buddy in the background. Got any better photos? I'm looking for shots of the speaker area (behind and in front of the font panel) and the wiring below the chassis.

David Goncalves
W1EUJ

I can have Frank takes some shots for you. He is a ham.

Mike WU2D