The AM Forum

THE AM BULLETIN BOARD => Technical Forum => Topic started by: w3khg on October 11, 2018, 09:11:22 AM

Title: SOLVED-Collins 390A Inoperative Frequency Dial Light
Post by: w3khg on October 11, 2018, 09:11:22 AM

Hello
No manual so I bring it to the list.

There are two wires which connect to the bulb assembly on the front panel frequency dial assembly. One is white, the other white/black. Both wires had pulled away from the assembly breaking their solder joint. Using an ohmmeter to determine which was ground and hot found both were ground or shorted to ground. Need advise what next step would be.

thanks
john

Title: Re: Collins 390A Inoperative Frequency Dial Light
Post by: WD8KDG on October 11, 2018, 10:08:46 AM

You need the R390/A Y2K R3 manual...……….

http://www.r-390a.net/faq-refs.htm

Scroll down on above link down load & print.

Craig,

Title: Re: Collins 390A Inoperative Frequency Dial Light
Post by: w3khg on October 11, 2018, 11:32:32 AM

Thanks again Craig.

73 john

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands