|
Title: Another Freebee Gonset GSB 101 Post by: KA3ZLR on August 02, 2011, 04:09:40 PM Got a Knock on the door a few weeks ago an in walked a good friend and he had trading material on hand ,, he needed a dish washer we had a roll away dish washer in the Barn so a Horse trade was made.. :)
Gonset GSB 101: Title: Re: Another Freebee Gonset GSB 101 Post by: K9PNP on August 02, 2011, 04:41:36 PM Now that is what I call a good looking Horse.....
Title: Re: Another Freebee Gonset GSB 101 Post by: K3ZS on August 02, 2011, 04:49:46 PM That is what I use for my first and only amp. Looks like it was painted black inside.
Title: Re: Another Freebee Gonset GSB 101 Post by: WBear2GCR on August 02, 2011, 08:52:29 PM Note the Peter Dahl iron that has been retrofitted? That is good. _-_-bear Title: Re: Another Freebee Gonset GSB 101 Post by: KA3ZLR on August 03, 2011, 06:15:58 PM Hi,
Well so far all I have found Bad is a Fuse Rectifier 1N 1084 it's Open.... it Has Plate Joltage Has Filament Power and that's it so far...I don't know why somebody would Paint this...it ruins the collective value as far as Older Equipment goes Darn it. 73 Jack KA3ZLR Title: Re: Another Freebee Gonset GSB 101 Post by: kb3ouk on August 03, 2011, 08:32:02 PM what tubes are in it? looks to me like 572's. at least the tubes in that are mounted vertically, the 572b's in my hunter 2000b are in there hoizontal, what a pain putting those things in there, then broke the plate clip off the end of one of the parasitic supressors, fun trying to get that soldered back together, had to take the tubes out to get to it after i just got done putting them in then had to take them all out, since it couldnt have been one of the upper clips i broke, it was one clear at the bottom.
Title: Re: Another Freebee Gonset GSB 101 Post by: KM1H on August 03, 2011, 08:45:51 PM Id say it covers 11-20M rather well ;D AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
|