|
Title: Stainless Steel U Bolts Post by: Knightt150 on April 27, 2010, 03:55:30 PM Where is a good source for STAINLESS STEEL U Bolts the ones used to clamp the mast pipe to my TR3 BELL rotor. The problem is the inside thread to thread is mine is 2 1/4 inches. You can buy 2 inch U bolts but not the 2 1/4. I need 1/4 inch threads also.
John W9BFO Title: Re: Stainless Steel U Bolts Post by: K6IC on April 27, 2010, 04:06:53 PM Hi John,
Try : http://amfone.net/Amforum/index.php?topic=8306.0 Any might also ook at DX Engineering, But McMasters is prob the best for selection. Think they also have HDG U-Bolts. 72 GL Vic Title: Re: Stainless Steel U Bolts Post by: Superhet66 on April 27, 2010, 04:08:33 PM That is an odd ball size but this fella is Ham friendly and may have it.
http://www.rotorservice.com/ Dylan. Title: Re: Stainless Steel U Bolts Post by: Pete, WA2CWA on April 27, 2010, 04:49:24 PM You can get it from MFJ/HyGain:
http://www.hy-gain.com/Product.php?productid=5038200 They have all the rotor parts for the CDE rotors. Title: Re: Stainless Steel U Bolts Post by: WBear2GCR on April 27, 2010, 07:31:53 PM You don't actually need U bolts, if you have two bolts and something cut or machined to go around the AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
mast. Like cut with a hole saw out of solid stock... fwiw. _-_-bear |