The AM Forum

THE AM BULLETIN BOARD => Technical Forum => Topic started by: VE7 Kilohertz on November 28, 2007, 10:35:16 AM

Title: NECWin Pro help
Post by: VE7 Kilohertz on November 28, 2007, 10:35:16 AM

Hi Guys,

Installed NEC WIN Pro (v1.6) and I can't find a place to enter height above ground for the antenna. I can find ground characteristics but no height.

Very cool program with lots of power. Big learning curve.

Thanks

Paul

Title: Re: NECWin Pro help
Post by: Steve - WB3HUZ on November 28, 2007, 03:52:13 PM

It is the Z cells (one for each end of the wire) in the spreadsheet, unless you are doing it the hard way and using text input.

Quote from: VE7 Kilohertz on November 28, 2007, 10:35:16 AM

Hi Guys,

Installed NEC WIN Pro (v1.6) and I can't find a place to enter height above ground for the antenna. I can found ground characteristics but no height.

Very cool program with lots of power. Big learning curve.

Thanks

Paul

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands