10m AM from Japan

(1/3) > >>

JH8SST:
Hello, this is JH8SST/7.  I've been doing AM on 40m and 10m since 2014, but restricted to domestic QSO.

I learned from WU2D Mike YouTube that international 10m AM contacts are made on 29.010 MHz and around recently, and I made the first time trans pacific DX QSO with WB8KRY Joe on 10m AM on Feb. 2 2024.  I was so excited.

I'm using a home brew TX - 6BX6(VXO)-5763(doubler)-813 plate/screen modulated by 6J7-6SN7-6L6GC Push-Pull modulator.  RX is also home-brew RF1 IF2.  Antenna is a 3 element 14/21/28 tribender up 25ft high.

I usually QRV at around 22:00 to 01:00 UTC beaming to USA.  I'm going to try Europe at around 06:00~ UTC.

I do hope to see you on 10m AM.

Best 73's, Jun JH8SST/7

KL7OF:
Thank you for being there.  I will look for you from Arizona.  Steve. KL7OF

JH8SST:
Steve, thanks a lot for the comment.   I'm trying to QRV at around 22:00 UTC, as long as noise is low.   I'm looking forward to meeting you on the air.

73's JH8SST/7 Jun

K3GTS:
Hello Jun will be listening from the East Coast near Philadelphia Pa 73s Gil K3GTS

JH8SST:
This morning, the propagation of 10m was excellent and the band was very quiet here. I heard rag chew was going on on 29.010MHz.

I worked WB8KRY followed by WA8SAJ. The AM signals from them came in 56 to 59+ QSB !   

WA8SAJ Jeff's Crystal microphone gave me AM signals of excellent readability.  . 

It's great morning !   Many thanks to Joe and Jeff.  I do hope to see you on the air again.  Best 73's, Jun JH8SST/7.

Navigation

[0] Message Index

[#] Next page

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands