LTSpice components

[Opcom]

I have gotten pretty good at drawing CRTs in LTSpice Here are a couple generic ones and a high end one to get anyone started on the modulation scope or making a schematic from tracing out a piece of gear.

There are no accompanying models but that is usually not an issue as you can add the capacitances and odd things like the 200-2000 megohm helical accelerator resistance from measurements or datasheets if you know how to create the full components. I have not figured that out..

Using these shapes, you can place it in a schematic then right-click on it and 'open symbol' to change pin numbers or move/edit/eliminate text.

You will have to rename the files to .asy because zip files and LTSpice files can't be uploaded.

[John K5PRO]

Nice work.